MachineJunkie Forum Index MachineJunkie
A site for addicts of classic woodworking machinery
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Interchangeability of Work Holder Clamp Assembly (G4/G100)

 
Post new topic   Reply to topic    MachineJunkie Forum Index -> Hammond Glider Saws
View previous topic :: View next topic  
Author Message
MILO



Joined: 20 Nov 2016
Posts: 4

PostPosted: Fri Jun 16, 2017 8:59 am    Post subject: Interchangeability of Work Holder Clamp Assembly (G4/G100) Reply with quote

Hello,
I have been looking for the work holder assembly for a G100 for sometime. I do have the opportunity to purchase one for the G4. From the manuals and pics I can see that some of the castings are different but overall similar in design. I was hoping that someone here who has experience with both machines could weigh in if the G4 one could be used with the G100 without or with minimal modification. I do have access to metalworking machinery so some fabrication on my part would not be a problem, but I want to be sure that it would be worthwhile before making any purchases.

Any info or suggestions would be greatly appreciated.

Thanks,
MILO
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MachineJunkie Forum Index -> Hammond Glider Saws All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group